Dinzagarms.com

Fire Control Groups

We currently stock Saiga, VEPR & AK specific FCG's that are essentially drop-in and modified for each specific application. These are made from Tapco G2 single hook AK FCG's.



Saiga PG Converted

used when moving fcg forward

Saiga FCG

Note: pics may note reflect exact geometry

Click these pics for a larger view. Use your browser's back button to return here.

Most Saigas have an internal bolt hold open (BHO) lever. If your weapon does not have one or you are not reinstalling it, select the Non-BHO Link in the chart below and we will send a hammer without that modification.

Tapco   Arsenal Double Stage

FCGPGC3 left, FCGPGC3DS 2-stage right

The Saiga-308 FCG has many extra modifications to address issues such as the extra gap in trigger hole, oversized bolt, receiver cross member and safety lever engagement. You may need to file a little off the welded up pad on the RH trigger leg for proper safety engagement. Also the supplied washer is to be installed on the RH side of the trigger body with the trigger pin going through it.

Optional - you may notch the safety lever tang to clear the disconnector to make the safety lever reinstall easier. Otherwise you need to leave the trigger pin out of the RH side of the receiver until the safety lever is reinstalled.

All the Saiga FCG's have the parting lines removed and contacting surfaces polished for super smooth cycling and improved reliability. They also include a disconnector spring and hitch pin clips to retain the FCG pins. These count as 3 compliance parts.

Click the part # to add to cart

Saiga Model Manufacturer Price Part #
545x39, 223, 762x39, 20 ga Tapco G2 $60.00 FCGPGC1
Saiga 12 Tapco G2 $65.00 FCGPGC2
Saiga 308 Tapco G2 $75.00 FCGPGC3
Saiga 410 Tapco G2 $75.00 FCGPGC4
Non BHO Option NONBHOFCG




Saiga Factory Config

used for factory replacement

Non PG Converted

Note: pics may note reflect exact geometry

Click these pics for a larger view. Use your browser's back button to return here.

The Saiga factory config FCG's count as 2 compliance parts, the disconnector and hammer, which are marked USA. The trigger block is included, but the trigger has been milled off.

Most Saigas have an internal bolt hold open (BHO) lever. If your weapon does not have one or you are not reinstalling it, select the Non-BHO Link in the chart below and we will send a hammer without that modification.

We do not offer a factory config FCG for the Saiga-308 due to the complex geometry required. Your best bet for improving the pull and angle is to do the pistol grip conversion or simply send us your factory parts for polishing.

All the Saiga FCG's have the parting lines removed and contacting surfaces polished for super smooth cycling and improved reliability. They also include a disconnector spring and hitch pin clips to retain the FCG pins. These count as 3 compliance parts.

Click the part # to add to cart

Saiga Model Manufacturer Price Part #
545x39, 223, 762x39, 20ga Tapco G2 $70.00 FCGNPG1
12ga Tapco G2 $75.00 FCGNPG2
.308 Tapco G2 N/A N/A
410 Tapco G2 $80.00 FCGNPG4
Non BHO Option Non-BHO Link






VEPR FCG's

Click these pics for a larger view. Use your browser's back button to return here.

Tapco

Note: pics may note reflect exact geometry

New in stock are these VEPR fire control groups for all VEPR weapons including 5.45x39, .223, 7.62x39, .308, 7.62x54r and 12 gauge.

They are currently made from Tapco G2 Fcg's with the exception of the 7.62x54r FCG being made from Arsenal Single Stage.

Vepr Safety Mod

Optional - you may notch the safety lever tang to clear the disconnector to make the safety lever reinstall easier. Otherwise you need to leave the trigger pin out of the RH side of the receiver until the safety lever is reinstalled.

All the VEPR FCG's have the parting lines removed and contacting surfaces polished for super smooth cycling and improved reliability. They also include a disconnector spring and hitch pin clips to retain the FCG pins. These count as 3 compliance parts.

Click the part # to add to cart

VEPR Model Config Price Part #
5.45, .223 & 7.62 Rifles Tapco G2 Single Stage $60.00 FCGVEP1
12 Gauge Tapco G2 Single Stage $65.00 FCGVEP2
.308 Rifles Tapco G2 Single Stage $75.00 FCGVEP3
7.62x54R Rifles Arsenal Single Stage $85.00 FCGVEP54R










Red Star Arms Adjustable FCG's

Click these pics for a larger view. Use your browser's back button to return here.

FCGRSAAK

Note: pics may note reflect exact geometry

These are for standard AK's. These will not work in Saigas unless they are modified to fit.

This trigger group is adjustable for Pretravel, Overtravel, Disconnector Engagement, and Trigger Pull. Depending on your preference and application, it can be adjusted for Single Stage or 2-Stage pull.

Package includes heat treated blued hammer, trigger, and disconnector, along with a US made Wolff disconnector spring, and a cheater pin which holds the trigger and disconnector together while installing the parts in your rifle. Allen wrench is included for adjustment, loctite for the screws and detailed instructions for installing and adjusting your trigger group. All parts are CNC machined from solid steel barstock, and the three piece group will count as 3 US parts.

Click the part # to add to cart

Model Config Price Part #
Standard AK Pistol Grip $75.00 Sold Out
308 AK Pistol Grip $95.00 Sold Out




Tapco AK47 FCG's

Click these pics for a larger view. Use your browser's back button to return here.

Single Hook   Double Hook

Single hook left, double hook right

These Tapco fire control groups are for standard AK's. These will not work in Saigas unless they are modified to fit.

All G2 components are heat treated to a 45-48C Rockwell hardness and manufactured with tough 4140 tool-grade carbon steel. The “No fumble” trigger sleeve allows you to assemble the trigger group outside the rifle and drop it in as one piece. Each piece is finished in a military grade dark black oxide. These FCG's count as 3 compliance parts and are available in single hook and double hook and do not include a disconnector spring.



Click the part # to add to cart

Model Price Part #
Single Hook G2 $39.00 FCGG2SH
Double Hook G2 $39.00 FCGG2DH




FCG Accessories

Also on the Conversion Parts page

Click for info Name Price Part #
E-Clips (3) $0.50 AKECLIP
Hitch Pin Clip (3) $0.50 AKHITCH
Disconnector Spring $3.00 AKDISCO
AK Ret Plate $9.00 AKRETP
S12 Ret Plate $12.00 S12RETP




Single Hook vs Double Hook

Here's the difference between single and double hook receiver cuts. The Saigas are set up for single-hook. Otherwise if you want to use a double hook you need to cut the additional relief in the receiver or remove the bottom of one of the trigger hooks.

Double Hook Trigger means the trigger has 2 hooks that engage the hammer. Only Tapco offers these. IMHO, double hooks offer no extra advantage, but some customers prefer them so we offer them. Arsenal and Red Star Arms adjustable FCG's are only available as single hooks.



Downloads:

Install Instructions for fire control groups.

Promo Flier for Arsenal fire control groups.

Saiga PG Conversion Overview - Download this .pdf file for tips, suggestions, parts list and a brief overview of the pistol grip conversion.

After install of any AK FCG, verify orientation and function of the FCG and safety lever before reassembly.