This bullet guide is for the flat-cut trunnion .223 Saiga rifles. Installation of this guide allows your rifle to accept and feed galil orlite magazines as well as most AK-74 and. 223 magazines. This is the guide, screw and allen wrench only, no drill or tap. Requires #8-32 drill & tap. (note: pic may not reflect actual geometry)

Note! - If you have a rivet hole in your trunnion, contact us and we will get you the correct hardware.

Downloads: (Adobe Acrobat required -> It's a free download)

Install Instructions for all bullet guides.

Magazine Options for .223 rifle with bullet guide.

Bullet Guide Install Video - made by Fred Hart, thanks!

The front trunnion is the block of steel riveted in the front of the receiver that the barrel is pressed into. The flat-cut description comes from the shape of the area immediately below the chamber face.

Bullet guide installed properly. You may find it beneficial to insert a magazine first before drilling to ensure proper alignment between the guide and mags. The step of the guide goes under the barrel and the ramped end goes towards the magwell.