Dinzagarms.com

5.45x39 Round Trun Guide Only

This bullet guide is for the round trunnion 5.45 Saiga rifles. Installation of this guide allows your rifle to accept and feed high capacity AK magazines. This is the guide, screw and allen wrench only, no drill or tap. Requires #8-32 drill & tap. This design allows feeding of most AK-74 magazines.(note: pic may not reflect actual geometry)

Note! - If you have a rivet hole in your trunnion, contact us and we will get you the correct hardware.

Downloads: (Adobe Acrobat required -> It's a free download)

Install Instructions for all bullet guides.

Bullet Guide Install Video - made by Fred Hart, thanks!



The front trunnion is the block of steel riveted in the front of the receiver that the barrel is pressed into. The round description comes from the shape of the area immediately below the chamber face.



Bullet guide installed properly. You may find it beneficial to insert a magazine first before drilling to ensure proper alignment between the guide and mags. Note, actual geometry may be different than what is shown in the photo.