Dinzagarms.com

Crowning Tools for Purchase

Click the part # to add to cart

Rifle Crown/Facing Tools

The Facing tool squares up the muzzle while the crown tool cuts a beveled 11 degree target crown into the face. Both tools have a threaded base for using either a drill adapter or handle.



Crown Tool

# CROWNR50 - $55 - Target Crown Tool - 1/2" w/ 11 degree face



Crown Tool

CROWNR75 - $55 - Sold Out - Target Crown Tool - 3/4" w/ 11 degree face



Rifle Facing Tool

# FACINGSM - $55 - Small Facing Tool - 3/4" w/ 90 degree face



Shotgun Facing Tool

# FACINGLG - $71 - Large Facing Tool - 1" w/ 90 degree face



Crown Adapter

# DRILLADAPTER - $13 - Drill Adapter



Crown Handle

# TOOLHANDLE - $15 - Tool Handle - can be used as a drill adapter with threaded hole in the end or as a crown/tool handle with the hole in the side.



Rifle Crown Pilots

Crown Pilot

# CPILOT22LR - $25 - crowning pilot for .22LR cal

# CPILOT545 - $25 - crowning pilot for 5.45x39 cal

# CPILOT223 - $25 - crowning pilot for .223 cal

# CPILOT65 - $25 - crowning pilot for 6.5 Grendel

# CPILOT68 - $25 - crowning pilot for 6.8 SPC cal

# CPILOT762 - $25 - crowning pilot for .308 and 7.62 cal

# CPILOT50 - $25 - crowning pilot for .50 Beowulf



Shotguns

The shotgun crowns are a 90 degree cutter and is mainly used after you cut the barrel back and need to square it up prior to threading. Facing tool requires either a tool handle or drill adapter. The pilots are for cylinder bore barrels only.

Shotgun Facing Tool

# FACINGLG - $71 - Large Facing Tool - 1" w/ 90 degree face



Crown Adapter

# DRILLADAPTER - $13 - Drill Adapter



Crown Handle

# TOOLHANDLE - $15 - Tool Handle



Shotgun Facing Pilots

# FPILOT410 - $25 - facing pilot for .410 shotgun

# FPILOT20 - $25 - facing pilot for 20ga shotgun

# FPILOT12 - $25 - facing pilot for 12ga shotgun





Downloads:

Instructions for crowning your barrel.

Threading Instructions

308 FSB Removal/Install

S-12 Threading Instructions

Muzzle Cutter Kit Instructions and Rental